Fast Temperature Recovery Melt Flow Index Tester for Resin Sample Analysis

• Customization: Available
• After-sales Service: Lifetime Maintenance
• Warranty: Lifetime Maintenance
• Model NO.: GT-MFI-450V
• Type: Material Testing Machine
• Power Source: AC220V
• Standards: ISO1133, ASTM D1238 and GB/T 3682
• Temperature Accuracy: 0.5℃
• Intervals Accuracy: 0.1 Second
• Operating Temperature: 50 ℃ to 450℃
• Control Mode: Tablet Computer
• Mvr Displacement Accuracy: 0.02mm
• Transport Package: Wooden Package
• Specification: GT-MFI-450V
• Trademark: GT-TEST
• Origin: Chengde, China
• Package Size: 168.00cm * 100.00cm * 150.00cm
• Package Gross Weight: 150.000kg

Product Description

Product Description

Melt Flow Indexer GT-MFI-450V

Standards

The tester is far superior to all national and international standard of Melt Flow Rates requirements, including ISO1133, ASTM D1238 and GB/T 3682 method A & B.

Product Features
You can acquire multiple test results in one test, including MFR, MVR, Density, Apparent Viscosity, Shear Stress, Shear Rate.
The MFI device is controlled by the tablet computer.
The application software has the functions of parameter setting, constant temperature control, cutting, calibration, timing, display of MFR and MVR results, calculation of melt density, and query and export of test data.
In order to prevent misoperation, some important operations require password verification.
Fast heating rate, small overshoot, high constant temperature accuracy, quickly restore the constant test temperature. With upper limit temperature protection, constant temperature voice prompt, restore time voice prompt.

Application

This type of Melt Flow Indexer is a new and affordable tabletop instrument that tests the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials, in the form of granules, strips of film etc. This test method is particularly useful for quality control tests on thermoplastics. MVR will be found particularly useful when comparing materials of different filler content and when comparing filled with unfilled thermoplastics. The MFR can be determined from MVR measurements provided the melt density at the test temperature and pressure is known. You can acquire multiple test results in one test, including MFR, MVR, Density, Apparent Viscosity, Shear Stress, Shear Rate. 

High Accuracy

The built-in microprocessor maintains temperature control to within ± 0.5℃, with rapid ram-up to the set point. Extruded material is automatically cut off by the built-in scraper mechanism at preset intervals, controllable to ± 0.1second.

Ease to operate! 
Testing Melt Flow Rate has never been so economical or easy to do! The tester is supplied completely with the accessories and weights necessary for maintenance and operation. Nothing else to buy--just plug it in and start a test.

Product detail images

Product Standard configuration
1. Piston Rod             
2. Die                    
3. Die Cleaning Tool       
4. Cut-off Knife            
5. Cylinder Cleaning Tool           
6. Sample Charging Tool             
7. Lever Meter            
9. Cylinder               
10. Weights (7 levels of load: 0.325/1.2/ 2.6/ 3.8/ 5/ 10/ 21.6kg)  

Product Parameters

Product Technical Parameters
Operating temperature	50 ℃ to 450℃
Temperature control accuracy	≤0.2℃
Temperature display resolution	0.1℃
Control mode	tablet computer
MVR displacement accuracy	0.02mm
Temperature recovery time	<4 min
Power supply	220V 50Hz
Communication port	RS485 / USB
Temperature measuring points	2
Measurement range	(0.1-100)g/10min and (0.01-350)cm³/10min

Project Cases

Main Products & Application Scenarios

Company Profile

Golden Time Technology Development Limited, founded in 2013, is a high-technology enterprise professional in designing, manufacturing and selling material testing equipment, focusing on providing global clients with high-quality plastic pipe and engineering plastics laboratory testing equipment solutions. Headquartered in Chengde city, the company has become a reliable partner in the plastics industry chain based on technological innovation and globalization vision.

Thanks to the engineers' rich technology and 20-year experience, we can provide turn-key project for plastic pipe laboratory, including all types of testing equipment for plastics pipes. 

Holding a large market not only in China, the products also have been sold to 35 countries located in Asia, Europe, South & North America.

 

Plastic Pipe Testing Machines

Hydrostatic Pressure Tester, Thermal Tanks, End Closure, Thermal Cycling Tester, Drop Weight Impact Tester, Ring Stiffness Tester, Pipe Cycling Pressure Impact Tester, Pipe Creep Tester, Opacity Tester, Pipe Chamfering Tester, Pipe Cutting & Chamfering Tester, Water Hammer etc.

 

Engineering Plastics Testing Equipment:

Universal Testing Machine (UTM), Melt Flow Indexer, Pendulum Impact Tester, Full Notch Creep Tester, HDT/Vicat Tester, Notched Constant Tensile Tester (NCLS), Bulk Density Tester, Specimen Maker, Visocometer, Environmental Stress Crack Tester (ESCT), Elongation Tester etc. 

Products can be customized. We offer a complete range of testing products for plastic pipes and raw materials, and can provide total laboratory testing solutions. Our technical personnel and assembly workers are highly experienced and familiar with all international standards and ASTM standards, enabling us to design, develop, and manufacture non-standard products. After-sales service is prompt, with solutions proposed within 24 hours.

Packing & Delivery

FAQ

Q:Can your company accept customization?
A: Yes. Our machines can be customized by client.

Q:How to guarantee your after-sales service?
A:Our philosophy is one year warranty and lifetime service. After the warranty period is exceeded, if there is any problem, we will provide support for you in time. (only charge travel expense and parts cost at most.)

Q:What is the language about software?
A:It can switch between Chinese and English.

Q:May the customer not use your company's computer?
A:Sure. But please tell us what type your computer is. We need to confirm your computer can install the software. And we can subtract the price of computer from offer.